Climbing Wall Panels

Name: Climbing Wall Panels
Brand: Chompers Climbing
Availability: InStock

Climbing Wall Panels

$0.00 USD

Sale Sold out

Chompers Climbing Wall Panels are project-ready birch plywood panels designed for commercial climbing gyms, training walls, school facilities, university recreation centres, home walls and full climbing gym projects. Built from 18mm 13-layer birch plywood, each panel can be supplied with custom CNC cutting, installed M10 T-nuts, custom drill patterns and clear coat or textured finishes.

These panels are designed for buyers who want a more efficient alternative to sourcing raw plywood, drilling T-nut grids and applying finishes on site. By supplying panels to project specifications, Chompers helps reduce installation labour, improve consistency and simplify the build process.

Climbing Wall Panels can be purchased as standalone materials or supplied as part of a complete Chompers gym project with steel structures, holds, wooden volumes, matting, adjustable walls and installation supervision.

Applications

Chompers Climbing Wall Panels are designed for indoor climbing walls, commercial climbing gyms, training walls, spray walls, school climbing facilities, university recreation centres, recreation centre projects and home wall builds.

Recommended applications include:

Commercial climbing gym construction
Existing gym panel replacement
Training walls
Spray walls
System board areas
School climbing walls
University recreation climbing walls
Home climbing walls
Government and recreation centre projects
Full commercial climbing gym builds

The panels are best suited to projects where the buyer wants reliable, pre-drilled and finished climbing wall surfaces that are ready for efficient installation.

Construction & Materials

Chompers Climbing Wall Panels are made from 18mm 13-layer birch plywood. The multi-layer birch construction is selected for strength, dimensional stability and long-term use in climbing wall environments.

Available construction and finish options include:

18mm 13-layer birch plywood
Cold-pressed panel construction
Custom CNC cutting
Custom T-nut drill patterns
Installed replaceable M10 T-nuts
Clear coat finish
Climbing texture finish
Custom panel colouring
Laser engraving
CNC etching
Protective film for transit

Panels can be supplied to match the needs of the wall design, route-setting layout, brand presentation and installation requirements.

Recommended Wall Types

Chompers Climbing Wall Panels can be used across a wide range of indoor climbing wall types.

Recommended wall types include:

Commercial bouldering walls
Lead climbing walls
Top rope walls
Speed walls
Training walls
Spray walls
System board areas
Adjustable climbing walls
School and university climbing walls
Recreation centre climbing walls
Home climbing walls

Custom T-nut patterns allow the panels to support different wall functions. A dense drill pattern may be preferred for spray walls and training walls, while a more standard commercial pattern may suit general bouldering and rope climbing areas.

Commercial Delivery & Support

Chompers can supply climbing wall panels as standalone materials or as part of a larger commercial climbing gym project.

For standalone panel supply, panels can be manufactured to project specifications and prepared with the required cutting, T-nut layout and finish. This helps reduce on-site labour and simplifies the installation process.

For full gym projects, panels can be supplied alongside wall structures, steel fabrication, holds, wooden volumes, matting and installation supervision. This gives clients a more coordinated project workflow and reduces the need to manage multiple suppliers.

Chompers can support international supply, with a primary focus on Asia and Oceania.

Internationally Recognised
EN-12572 Rated
Worldwide fulfillment

View full details

18mm Birch Ply
Built from 18mm 13-layer birch plywood for strength, stability and climbing wall durability.
Custom CNC Cutting
Panels can be CNC cut to suit project-specific wall shapes, layouts and installation requirements.
Installed M10 T-Nuts
Panels can be supplied with replaceable M10 T-nuts installed in your preferred drill pattern.
Custom Finishes
Available with clear coat, climbing texture, custom colours, laser engraving and CNC etching.

1 4

Project-Ready Climbing Wall Panels For Commercial And Training Walls

Climbing wall panels are one of the most important components in a climbing wall project. They form the usable climbing surface, hold the T-nuts, support repeated route setting and influence the long-term durability of the wall.

Chompers Climbing Wall Panels are designed for buyers who want panels supplied to climbing-specific requirements rather than starting with raw plywood. Each panel can be prepared with CNC cutting, custom T-nut patterns, installed M10 T-nuts and surface finishes selected for the project.

For commercial gyms, this can reduce significant labour. Preparing raw plywood on site requires cutting, drilling, installing hardware, coating, texturing and quality checking. Mistakes in any of these steps can affect the installation, wall finish or future route-setting usability.

By supplying project-ready panels, Chompers helps facilities achieve more consistent results and a cleaner build process.

The panels are made from 18mm 13-layer birch plywood, which provides strength, stability and reliable performance for climbing wall use. Custom drill patterns can be used for general route setting, spray walls, system board layouts and project-specific requirements.

Finish options allow the panel surface to match the facility. Clear coat panels preserve the natural timber appearance. Textured panels create a climbing-specific surface. Custom colours, laser engraving and CNC etching can be used where branding or visual design is important.

Chompers Climbing Wall Panels can be supplied for new commercial gym projects, existing gym upgrades, school walls, university recreation centres, training facilities and home walls.

Technical Specifications

Product type: Indoor climbing wall panels
Material: 18mm 13-layer birch plywood
Cold-pressed construction
Custom CNC cutting available
Custom T-nut drill patterns available
Replaceable M10 T-nuts available
Clear coat finish available
Climbing texture finish available
Custom panel colouring available
Laser engraving available
CNC etching available
Protective film supplied during transit
Suitable for commercial climbing gyms
Suitable for bouldering, lead, top rope, speed and training walls
Suitable for spray walls and system board areas
Suitable for schools, universities and recreation centres
Suitable for home wall projects
Available as standalone panel supply
Available as part of a full commercial climbing gym project
International supply available

Ideal For

Commercial Climbing Gyms
Build engaging climbing experiences with products designed for high-traffic commercial environments, frequent route-setting cycles and long-term durability.
Competition Walls
Create modern competition-style movement, coordination challenges and visually distinctive routes using commercial-grade climbing products.
Training Facilities
Support athlete development, strength training and movement practice with products designed for performance-focused climbing environments.
Universities and Schools
Create safe, durable and engaging climbing facilities suitable for education, recreation and structured climbing programs.
Route Setters
Expand route-setting possibilities with products that support modern movement, creative problem design and versatile climbing experiences.
Recreation Centres
Add climbing experiences that appeal to a broad range of users while maintaining durability and ease of maintenance.

Product Gallery

Related Categories

FAQ

What are Chompers Climbing Wall Panels made from?

Chompers Climbing Wall Panels are made from 18mm 13-layer birch plywood.

Do the panels come with T-nuts installed?

Yes. Panels can be supplied with replaceable M10 T-nuts installed in your preferred drill pattern.

Can I choose a custom T-nut pattern?

Yes. Custom drill patterns are available for general route setting, spray walls, system boards and project-specific layouts.

Can the panels be CNC cut?

Yes. Chompers can provide custom CNC cutting to suit wall shapes, installation layouts and project requirements.

Can panels be included in a complete gym build?

Yes. Panels can be supplied as part of a complete Chompers gym project with wall structures, matting, holds, volumes and installation supervision.

Are these panels suitable for commercial climbing gyms?

Yes. Chompers Climbing Wall Panels are designed for commercial climbing gyms, training facilities, schools, universities and recreation centres.

Country/region

Climbing Wall Panels